Hollow Shaft Powder Clutch Winding Brake For Tension Control Packaging Machine

Description

Hollow Shaft Powder Clutch Winding Brake For Tension Control Packaging Machine
Description
P
recautions
Do not overload or cool in place
When the magnetic powder clutch/brake is working, its torque, speed and slip power must not exceed the
rated cooling mode (natural cooling, forced air cooling, water cooling) depending on the slip power
generated during actual operation. Cooling air requires filtration of Oil and water. Conditional,
temperature detection, alarm device can be installed to prevent excessive temperature and affect the
service life of magnetic powder. (temperature 80 ° C)
●About life
The service life of the magnetic powder clutch/brake is the life of the magnetic powder. Generally speaking,
the magnetic powder has a service life of 4,500-7,500 hours under the condition of no overload; however,
its service life can be extended several times In the state of being over, such as: reducing the working
torque of the magnetic powder clutch/brake, relative slip speed And the slip power is 50%-70% of the rated
value. That is to say, when designing, the margin Is enlarged as much as possible.
About torque
After the magnetic powder clutch/brake is used in the factory, the magnetic powder will wear-in during the
early use, and the torque will decrease slightly, which can be compensated by adjusting the current.
Characteristic
1, high-precision torque, torque control range is very wide, and high control accuracy, the transmission of
torque and excitation current into the correct ratio, can achieve high-precision control.
2Excellent durability and long service life The super-alloy magnetic powder with high heat resistance, wear
resistance, oxidation resistance and corrosion resistance has long service life.
Stable torque characteristics of superior stability The magnetic properties of the magnetic powder are
good, and the bonding force between the powder particles is stable, the sliding torque is very stable, and
the torque can be kept constant regardless of the relative number of revolutions .
4 Continuous sliding operation uses a cooling structure with excellent heat dissipation effect and uniform
heat distortion, and high heat resistance of magnetic powder, allowing for connection and braking power
and sliding power, and smooth sliding operation without causing vibration.
5 The connection is smooth and the impact is slightly small when there is no impact connection, and it can
be started and stopped smoothly without impact. And the resistance torque is slightly smaller, which will
not cause useless heat.
6 Suitable for high-frequency operation in response to agile and fast and special heat dissipation structure,
suitable for high-frequency operation.
7 Lightweight, maintenance-free, long-life type, simple and lightweight, using high-temperature coils and
special grease bearings, and special treatment for the armature that is easy to wear, prolonging the service
life.
Scope of use
Printing machinery, paper machinery, bag making machinery, papermaking machinery, wire and cable
machinery, coiling machinery, wire machinery, bale bag machinery, textile machinery, weaving machinery,
woodworking machinery, test equipment, simulation load, various mechanical precision tension control,
general Industrial equipment, and other general industrial machinery.
Application route
1. Buffer start and stop: The cushioning effect of the smoothing characteristic and the constant torque
characteristic at the time of connection is the peak torque with stable acceleration and no impact.
2, continuous sliding, tension control
3, torque limiter
4, high-speed response
5, power absorption
6, positioning stop
7, for analog load
Package Includes:
FZ200K-1 1pcs